Machsupport Forum
Mach Discussion => Mach4 General Discussion => Topic started by: it*guy on February 23, 2015, 04:03:32 AM
-
So First I am new to the entire CNC Scene. So please forgive me if i miss anything along the way with information.
My problem is occurring when I have the machine softlimit button on, my machine passes right through the limits ??? AND only moves in the + direction >:(. when I turn off the softlimits it returns to normal operation ???.
I am using Mach 4 Hobby version 2230 with the PMDX 422 smart BOB. both are up to date with latest firmware/software. I am wondering if I have something in the settings wrong i.e. missed on/off tick. This option is very much a possibility seeing I am new to the CNC scene. My machine is a custom built 6'x10', from scratch 8).
-
have you got soft limits ticked in M4 config
-
I am away from the machine, but I will check in a little bit. Is there a way I can output all of my settings in mach4 for troubleshooting?
thanks!
V/R
Mike
-
This issue has been addressed in the PMDX support forums here:
http://www.pmdx.com/PMDX-Forums/index.php?topic=57.0
Bob
PMDX
-
Thanks Bob,
I hadn't quite made my way back to this forum to clear that up!
Everything is working great now BTW!
Video soon to follow!