Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: Hood on April 09, 2007, 05:19:23 PM
-
Have been trying to help out a member here but afraid I just cant make head nor tail of his machines pinouts as the PDF is in German and also the handwritten notes are in German.
Any help much appreciated.
Hood
-
Hi
I would like to have a look at it see if I can be any help I mostly talk german who know i will try to help
E-mail address bwshop@gmail.com
-
Thanks, have emailed them to you.
Hood
-
Hi
I`m living in Germany and use Mach since 3 years. If i can help you with my bad english here my E-Mail ad.: dampfhannes@googlemail.com
Greet`s
Hannes
-
Ask these guys http://www.artsoftcontrols.com/forum/index.php?board=54.0
-
Hi
Sorry I don't under stand every thing that is writhing there are some warning in there that I don't quite understand so I will try to help what do you need to know
-
Thanks for the replies, this is a link to Anthony's original post http://www.artsoftcontrols.com/forum/index.php?topic=2892.0
I have also attached all of the docs that are available and if anyone can help out I am sure Anthony would be most grateful.
Hood
-
Hi
What dose he need to know I do understand some of it but not every thing Let me know
-
Basically he is needing to know the pinouts for everything so he can assign them in Mach, he asked if I could do an xml with the info but afraid I couldnt make head nor tail of it.
Hood
-
Hi
Here is what I find pin 2 x dir pin 3 x step pin 4 y dir pin 5 y step pin 6 z dir pin 7 z step pin 8 w dir pin 9 w step pin 10 z limitswitch pin 12 y limitswitch pin 13 x limitswitch pin 15 w limitswitch pin 1 is pilot relay pin 14 is pilot relay #2 see if that will help let me know
-
Thanks Markkl, I will tell Anthony to look here.
Hood
-
Hi
The salesman of the machine is Austrian, it made walk the machine with Mach3.
I need to know the inputs, the outputs of my machine and speeds of the axis. Can you make me all the configuration of my machine on a file XML?
Thank you for your help.
Regards
Anthony