Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: krsykes23 on January 31, 2015, 04:03:03 PM

Title: Auto Tool Changer help....!
Post by: krsykes23 on January 31, 2015, 04:03:03 PM

Hi all,

Still very much a newby here, but I'm wanting help with setting up my Auto Tool Changer.  It's a Kress 1050 Spindle and Usovo
ATC, with 8 positions.  I also have a tool-length sensor mounted close to the 8 way tool rack.

I'm also using Sheetcam v6.0.15, with the Mach3 post.

Does anyone have a similar ATC and tool-sensor that could assist with some settings for Mach3?  I can obviously change the
positions of the individual toolholders.

Many thanks
Keith

Title: Re: Auto Tool Changer help....!
Post by: Hood on February 02, 2015, 03:48:20 PM

Maybe this will help?
http://www.machsupport.com/forum/index.php/topic,23064.0.html

Hood