Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Fred_evans on January 24, 2015, 08:29:37 AM

Title: overriding the home switches
Post by: Fred_evans on January 24, 2015, 08:29:37 AM

Hi chaps--
I seem to remember that there was a word or a setup feature which prevented overriding
the home switches on program startup

I would like my code to say g28 early in the program just to get the toolpost out of the way.
If the saddle is already on the home switches when it see g28 - well then it just merrily
overrides the switch

Any workaround??
best regards.
fred

Ps i believe you guys in the north are having a go with the weather- Hope none of you are affected

Title: Re: overriding the home switches
Post by: Hood on January 24, 2015, 09:06:02 AM

Try G53G0Z0 or whatever axis and machine coords position you wish it move to.

Hood

Title: Re: overriding the home switches
Post by: Fred_evans on January 25, 2015, 12:21:35 AM

Thank you