Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: mayhugh1 on April 08, 2007, 02:45:34 PM

Title: G75 Request
Post by: mayhugh1 on April 08, 2007, 02:45:34 PM
Are there any plans to implement a G75 Grooving/Parting cycle in MachTurn?

Terry
Title: Re: G75 Request
Post by: Brian Barker on April 08, 2007, 06:37:44 PM
Not at this time :( We think that it should be done in Cam as we can take very large files :)