Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: agrotech on December 31, 2014, 01:52:47 PM

Title: trying to emulate thc
Post by: agrotech on December 31, 2014, 01:52:47 PM
Hi, I am trying to emulate thc with hotkeys. Searching previous posts, it looks like some people had success and some didn't. I am using mach 3 3.043.062 running through an ess smoothstepper on windows 7 64 bit. I have enabled and emulated the thc inputs with the hotkeys set for left bracket[ and right bracket]. I have also clicked the "allow thc" button in the mill options tab. The thc min and max are set to 0 and 4 and it is a licensed version (not demo). I have also clicked the thc button in the smoothsepper configuration screen. When running gcode, I have thc up and down leds in the diagnostic screen but no axis movement. Have I missed something or is this just not possible using the smoothstepper? Sorry if this has already been answered.
Thanks
Title: Re: trying to emulate thc
Post by: agrotech on January 01, 2015, 02:16:39 AM
Nevermind, seems I can't emulate thc signals without the port driver. Still interested to know if anyone has figured out a way to move z up and down while cutting with a smooth stepper.