Machsupport Forum

G-Code, CAD, and CAM => LazyCam (Beta) => Topic started by: Jeff on April 04, 2007, 09:08:55 AM

Title: Lazy Cam not sending pass depth to G-code
Post by: Jeff on April 04, 2007, 09:08:55 AM

Lets say I change a layer to a cut depth of 5 and the depth per pass to 1 and send it to G-Code, it will cut 1 pass at a depth of 1 and stop. I'm new to this but I can see in Lazy Cam the 5 cuts when I rotate the part. For some reason it doesn't finish cutting to the depth of 5. Can anyone tell me what I'm doing wrong.

Thanks

Jeff

Title: Re: Lazy Cam not sending pass depth to G-code
Post by: Brian Barker on April 04, 2007, 10:06:09 PM

hmmmmm I think it is a plasma setting that you have... could you check your post options?
Thanks
Brian