Machsupport Forum
General CNC Chat => Show"N"Tell ( Your Machines) => Topic started by: cnctom on December 02, 2014, 08:36:34 PM
-
Hello last winter I started building a Jos 2006R2 for my first cnc build. I've got back to work on my project again because its winter again :( I just got done ordering the Gecko G540 3 Nema23 Steppers 620 oz/in with Mach3 included I just got done dealing with the seller and now an going with Mach4 upgrade. I'm also bought Antek PS-4N48 - 400W 48V Power Supply. Also the three 1610 Ball screws and 16MM Bearing Block linear slide guides 2 rail+4 SBR16UU for the Z axis and nema 23 mounts brackets. Expensive evening. I used turned ground and polished 1045 shafting instead of black pipe for a smoother run. I also milled up solid bearing carriers it was a lot of drilling and tapping and grinding but it was good fun.
http://s1314.photobucket.com/user/dieseltom/media/IMG_20141109_074816_947_zpsde07lwpz.jpg.html
http://s1314.photobucket.com/user/dieseltom/media/IMG_20141115_055459_729_zpsvcwcgnbi.jpg.html
http://s1314.photobucket.com/user/dieseltom/media/IMG_20141115_061522_074_zpssb0d3j2f.jpg.html
http://s1314.photobucket.com/user/dieseltom/media/IMG_20141107_154113_853_zpsqvcmagyu.jpg.html
http://s1314.photobucket.com/user/dieseltom/media/IMG_20141108_093719_025_zpsct5mux3u.jpg.html
http://s1314.photobucket.com/user/dieseltom/media/Mobile%20Uploads/IMG_20141123_131853_449_zpsowngwbq5.jpg.html
-
That's a nice looking machine..... What kind of wood did you use. How long did it take to build. Looks like it took you a year.
GooooooooooooooooD JOB
Rkjohn
-
Excellent work Tom - that is going to be some machine.
Don't forget to post more pictures of your progress - we all love pictures.
Tweakie.
-
Yes we want more pictures that looks like a great machine.
Rkjohn
-
Hello again more stuff came in this week Ball screws, Antek PS-4N48 - 400W 48V Power Supply 16mm linear rails with bearings, Gecko G540 and my steppers :) My wife and kids are saying Christmas came early and every day for a week for dad. So now let me give you some background Ive been a machinist sine 1997 building molds great fun for the last ten of those years Ive been programming, with Mastercam and Powershape , Powermill by the way if Powermill and Mastercam would get together there would be no other software just my opinion ;D I also Love building stuff and tying to do it right, My my most resent project was a snow blower which I sold to fund this project http://vid1314.photobucket.com/albums/t571/dieseltom/2013-02-09_12-22-35_625_zps67b0bfdb.mp4
Last weekend I was not happy with the lower brace is was springy so i built one out of aluminum no spring any more
(http://i1314.photobucket.com/albums/t571/dieseltom/IMG_20141207_110607_0381_zps04cfd5e1.jpg) (http://s1314.photobucket.com/user/dieseltom/media/IMG_20141207_110607_0381_zps04cfd5e1.jpg.html)
(http://i1314.photobucket.com/albums/t571/dieseltom/IMG_20141207_172449_5651_zps3f091f31.jpg) (http://s1314.photobucket.com/user/dieseltom/media/IMG_20141207_172449_5651_zps3f091f31.jpg.html)
So Ive been tying to find a wiring schematic for my Antek PS-4N48 - 400W 48V Power Supply I went to there and can not find one can some one direct me to one. I can find wiring schematics for everything else but this
(http://i1314.photobucket.com/albums/t571/dieseltom/IMG_20141212_181416_4161_zps92e023e6.jpg) (http://s1314.photobucket.com/user/dieseltom/media/IMG_20141212_181416_4161_zps92e023e6.jpg.html)
-
I finally found a schematic thanks
-
Well today I started in on my ballscrews the bearing blocks the ones i got from ebay didn't work for me so I designed some that would hold bearings and stepper motors all together and look nice it was time to break out the Kearney Trecker Dividing Head tomorrow i have to finish them up
(http://i1314.photobucket.com/albums/t571/dieseltom/IMG_20141213_145601_3191_zps758dce55.jpg) (http://s1314.photobucket.com/user/dieseltom/media/IMG_20141213_145601_3191_zps758dce55.jpg.html)
(http://i1314.photobucket.com/albums/t571/dieseltom/IMG_20141213_191106_5961_zps2f7b9514.jpg) (http://s1314.photobucket.com/user/dieseltom/media/IMG_20141213_191106_5961_zps2f7b9514.jpg.html)
(http://i1314.photobucket.com/albums/t571/dieseltom/IMG_20141213_191800_2021_zps9433de47.jpg) (http://s1314.photobucket.com/user/dieseltom/media/IMG_20141213_191800_2021_zps9433de47.jpg.html)
(http://i1314.photobucket.com/albums/t571/dieseltom/IMG_20141213_192400_5221_zps751ed550.jpg) (http://s1314.photobucket.com/user/dieseltom/media/IMG_20141213_192400_5221_zps751ed550.jpg.html)
-
Well this week I got to work on the X axis I came up with this
(http://i1314.photobucket.com/albums/t571/dieseltom/IMG_20141221_132742_5391_zps5e984eb5.jpg) (http://s1314.photobucket.com/user/dieseltom/media/IMG_20141221_132742_5391_zps5e984eb5.jpg.html)
(http://i1314.photobucket.com/albums/t571/dieseltom/IMG_20141221_142724_9011_zpsfd3e51a3.jpg) (http://s1314.photobucket.com/user/dieseltom/media/IMG_20141221_142724_9011_zpsfd3e51a3.jpg.html)
(http://i1314.photobucket.com/albums/t571/dieseltom/IMG_20141221_152140_3121_zps5599bec9.jpg) (http://s1314.photobucket.com/user/dieseltom/media/IMG_20141221_152140_3121_zps5599bec9.jpg.html)
I'm also working on the overkill washers now :) I still have to part them off
(http://i1314.photobucket.com/albums/t571/dieseltom/IMG_20141221_161833_1691_zpsff90ed2c.jpg) (http://s1314.photobucket.com/user/dieseltom/media/IMG_20141221_161833_1691_zpsff90ed2c.jpg.html)
-
Well I've got four days to play over Christmas here are some more updates
(http://i1314.photobucket.com/albums/t571/dieseltom/IMG_20141226_115324_8631_zps7c5385ab.jpg) (http://s1314.photobucket.com/user/dieseltom/media/IMG_20141226_115324_8631_zps7c5385ab.jpg.html)
Z axis plate
(http://i1314.photobucket.com/albums/t571/dieseltom/IMG_20141226_133732_4351_zps26a04eb6.jpg) (http://s1314.photobucket.com/user/dieseltom/media/IMG_20141226_133732_4351_zps26a04eb6.jpg.html)
(http://i1314.photobucket.com/albums/t571/dieseltom/IMG_20141226_135352_6831_zpsf794735e.jpg) (http://s1314.photobucket.com/user/dieseltom/media/IMG_20141226_135352_6831_zpsf794735e.jpg.html)