Machsupport Forum
Mach Discussion => VB and the development of wizards => Topic started by: BR549 on November 20, 2014, 10:09:54 AM
-
Someone Somewhere was asking about this and it IS possible in CB.
Selecting a tool from a directory of tool pictures.
Just a though, (;-) TP
-
Yes,
but you would need to build a screen, with BitMapButtons, or...... tool pics with invisible buttons over them, and then put VB script in them to set the Tool Number to that Pic when pressed.
Scott
-
Here is an example of doing this with loading a Gcode file. You selct the picture of the file and it will load it's GCODE file ready for you to cut. SheetCam can supply you with a Bitmap of the Gcode file.
http://www.machsupport.com/forum/index.php/topic,23944.0.html
(;-) TP