Machsupport Forum
G-Code, CAD, and CAM => LazyCam (Beta) => Topic started by: houseboater1937 on April 02, 2007, 04:14:29 PM
-
I have just downloaded lazycam for the first time. I am not a teckie but I can still figure most things out. What I can't figure is how do you machine a face in milling leaving an island in the centre. The only thing I can do is profile and only if I only take one cut. If i want to take more than 1 cut do I have to put in extra lines around the profile.
Any help wopuld be appreciated
Thanks
Doug
-
Hi, Houseboater:
If I read your questin correctly; There are two ways to leave an island. Easiest is if you have paid for the Pro-version of LazyCam. Then all you have to do is add an offset and key in different values for depth of cuts. If you want a lot of space between your outer perimeter and the island, you could then select the pocketing function.
The other way, and this is the way I have done it before LazyPro. is to draw your dxf with an offset and then select different chains. It is more difficult to leave a larger area using this metiod.
Hope I understood the question, and that this helps.
Bob @ BobsShop- Back to cutting and polsihing.
-
is lazy cam pro on sell now and is the turn portion working?
-
Turn has not been worked on but we hope to have time to work on it next week.
Thank you
Brian