Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: docltf on April 02, 2007, 12:57:26 AM

Title: pulse width
Post by: docltf on April 02, 2007, 12:57:26 AM
i have been running my setup in sherline mode.if i where to take it out of sherline mode and start playing with the step and dir pulse width.what would be the largest number mach3 will recognize.

thanks bill 
Title: Re: pulse width
Post by: Brian Barker on April 02, 2007, 07:58:30 AM
You can take it up to 15 but after that you may lock up your system :(