Machsupport Forum
Mach Discussion => FAQs => Topic started by: cbr929 on October 21, 2014, 04:57:34 AM
-
Hi,
i have a problem with my Mach3 and i cant find what is causing it,
i am using it with Cut2d and a CNCrouter parts pro 4848 machine.
Every job code i export from Cut2d it loads 10 times bigger in mach3, i have to scale all axis down to 0.1 to get the job in the right size.
I am using metric everywhere.
The problem is 100% identical to everything i export so it looks like a wrong setting somewhere but i cant find it.
Any ideas?
George
-
Hello and help, I finally have the cnc hot wire machine running. Problem is with scale, the parts are 12.56 times larger then the dimensions. Any leads to fix would be much appreciated..... Larry
-
1) Check that your Gcode file has a G20 or G21 (as appropriate) in the header.
2) In the Settings screen try the Axis Calibration feature – Set Steps Per Unit.
Tweakie.