Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: opajioka on October 10, 2014, 07:36:41 PM
-
Hi!
At my workplace we have a CNC machine we are using like a drill press that will occasionally pop up an error "Art code 3338" with a dialog box, "do you wish to continue y/n" and clicking either option causes Mach3 to close. Whenever this error has occurred it has been in the middle of a peck macro. The spindle continues to spin when the error pops up.
Mach version: R3.043.022
Galil motion control card is in a Win 7 PC connected via parallel port to a breakout board.
I could not find any info on Art Code 3338, any idea what's happening?
~Thanks
-
Probably best to email scott@machsupport.com to see if he can help.
Hood
-
Okay, will do thanks!