Machsupport Forum

G-Code, CAD, and CAM => LazyCam (Beta) => Topic started by: dscrawly on March 28, 2007, 04:51:49 PM

Title: Lazy Cam Pro License Not Working With Mach3 Licensed Version R2.0.061
Post by: dscrawly on March 28, 2007, 04:51:49 PM

Just purchased a LazyCam Pro License and I'm unable to get LazyCam to go into "Pro Mode".  Saved the DAT file to F:\Mach3 on the hard drive as per instructions.

Attached are a few screen captures.

Thanks,
Theodore

Title: Re: Lazy Cam Pro License Not Working With Mach3 Licensed Version R2.0.061
Post by: dscrawly on March 28, 2007, 05:00:57 PM

Sorry about the size of the pictures.  :-[

Title: Re: Lazy Cam Pro License Not Working With Mach3 Licensed Version R2.0.061
Post by: Brian Barker on March 29, 2007, 09:13:00 AM

Could you set up on the C: drive and tell me if it works?
thanks
Brian

Title: Re: Lazy Cam Pro License Not Working With Mach3 Licensed Version R2.0.061
Post by: dscrawly on March 29, 2007, 12:03:15 PM

Brian,
I realize now how some of the VB scripts were thrown off by not having the program installed on the C: drive.

LazyCam is now in "Pro Mode"  ;D ;D

Thanks Again!!

P.S.
 Wanted to buy into Lazy Cam Pro early in order to support the effort.  Looking forward to the upcoming 4th axis capability. 

Title: Re: Lazy Cam Pro License Not Working With Mach3 Licensed Version R2.0.061
Post by: Brian Barker on March 30, 2007, 09:46:27 PM

Happy to hear that you got it working!
I have the 4th axis all working on the screen :) Next I have to get it to output the Gcode :)