Machsupport Forum

Mach Discussion => Mach Screens => Machscreen Screen Designer => Topic started by: native34 on September 22, 2014, 10:21:30 PM

Title: Need help Please!!! Mach Screen design not working.
Post by: native34 on September 22, 2014, 10:21:30 PM

When i create a screen and place a bitmap button on the screen It doesn't matter what code i choose, whether it is OEM or STD. Im tryng to get the button to cycle start, but it won't do anything when pressed. I have a GCode element and a toolpath element and a load gcode button. When i press the load button i can choose the gcode that i want to run but when i hit cycle start nothing happens.

Title: Re: Need help Please!!! Mach Screen design not working.
Post by: ger21 on September 22, 2014, 10:31:57 PM

Add a reset button and led.

Title: Re: Need help Please!!! Mach Screen design not working.
Post by: native34 on September 29, 2014, 09:08:12 PM

So the designer needs a reset button and led to make everything else work properly?

Title: Re: Need help Please!!! Mach Screen design not working.
Post by: ger21 on September 29, 2014, 09:13:13 PM

No, Mach3 does.
When Mach3 starts, it's in reset mode, and won't run until you click the reset button.