Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: NPC-Egypt on March 28, 2007, 04:56:30 AM

Title: Offset table gone
Post by: NPC-Egypt on March 28, 2007, 04:56:30 AM

Hi
My offset table resets to zero (fixture 1 to 6 (G54-G59))  after testing the new relase 061
is there a way to restore it
Thanks

Title: Re: Offset table gone
Post by: Brian Barker on March 28, 2007, 06:23:35 AM

You can restore your offsets if you saved you fixture.dat file in you Macros/ (Your Profile ) directory

Title: Re: Offset table gone
Post by: NPC-Egypt on March 28, 2007, 09:46:09 AM

Thanks Brian
I found 2 fixtures.dat one in C:\Mach3\macros        and the other one in C:\Mach3\macros\Mach3Mill 
I copy the old file in the new directory and it is OK now.

Regards

Joe