Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: 3rdEyeRish on September 04, 2014, 08:39:53 PM

Title: Not getting the Uc100 pop up window when opening Mach3
Post by: 3rdEyeRish on September 04, 2014, 08:39:53 PM

I have the driver installed and see it connected under my unspecified devices window as working properly. Green light is lit but not the blue. Idk what im missing!?!?

Title: Re: Not getting the Uc100 pop up window when opening Mach3
Post by: Hood on September 05, 2014, 03:40:07 AM

If I am understanding what you are meaning, then go to Function Config menu and choose Reset Device Select then restart Mach.
Hood

Title: Re: Not getting the Uc100 pop up window when opening Mach3
Post by: 3rdEyeRish on September 05, 2014, 10:04:30 AM

I believe I did try that without any success.  I will Def try that again once I get back home. If anything I may reinstall mach 3 and try it again.