Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: BlrUsr on March 26, 2007, 02:20:30 PM

Title: [img]About Coil Diode[/img]
Post by: BlrUsr on March 26, 2007, 02:20:30 PM

Help me to know how correct I must connect Diode in my stepper motor board Fig1 or Fig2 , and why? Or whithout diode at all

Title: Re: [img]About Coil Diode[/img]
Post by: Brian Barker on March 27, 2007, 09:15:01 AM

You don't need to have a diode, Just get a drive and hook the motor to the drive.

Title: Re: [img]About Coil Diode[/img]
Post by: HillBilly on March 29, 2007, 10:01:22 AM

This article should give you some guidance.

http://www.cs.uiowa.edu/~jones/step/circuits.html

Darek