Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Rhetro on August 09, 2014, 06:38:26 PM

Title: Can mach3 drive a Gemonicsolutions machine (investigator propic)
Post by: Rhetro on August 09, 2014, 06:38:26 PM

Rhett  501 9844-2828

Title: Re: Can mach3 drive a Gemonicsolutions machine (investigator propic)
Post by: Tweakie.CNC on August 10, 2014, 07:18:09 AM

In principle Yes.
In practice if the internal electronics are not step / direction orientated you may need to replace the driver board.

Tweakie.