Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: dave66 on August 05, 2014, 09:54:47 AM

Title: Hi no homing in G20 only in G21
Post by: dave66 on August 05, 2014, 09:54:47 AM

Hi could anyone help with my machine not homing in G20 the machine is set to inches Im using a chinese usb motion controller I wish I just used a bob instead. when I change it in mdi to G21 metric then I can home all axes but I can not get it to roll back off the switch. and in G20 imperial I get no movement for homing. could it be the .dll file that came with the controller.
thanks Dave