Machsupport Forum
General CNC Chat => Show"N"Tell ( What you have made with your CNC machine.) => Topic started by: patrick71100 on March 25, 2007, 08:54:01 PM
-
i made these out of 4130 cromemoly billet for dads pulling tractor,mach 3 and g100 didnt let me down.
-
Great work patrick.
Is the underside beveled too? or was it just machined from one side?
Regards
Fernando
-
Say it again Fernando. They are Great.
Brett
-
I MACHINED THE .100 RELEIF FROM BOTH SIDES THE HARDEST PART WAS THE CAP,THE DRILL ,C-BORE, REAM, TAP ,SKIM MATING SURFACES FLAT ETC, I BOLTED ROD TO ANGLE PLATE TO CUT 22 DEG ANGLE AND CLAMPED CAP
AGAINST ANGLE PLATE BEFORE THE DRILLING ETC.MACH 3 CUTS PRETTY NICE CIRCLES BOT I FINISHED BIG AND SMALL
HOLES WITH BORING BAR
-
Beats buying some, and probably a lot stronger than bought ones too.
-
hi patrick71100
What are the chances of posting some film clips on www.youtube.com , would love to see the machining process in action
cheers
-
Hi again
www.artsoftcontrols.com has a feature to download film clips also http://www.artsoftcontrols.com/forum/index.php?board=60.0
sorry about the double post
cheers