Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Romanr9999 on July 20, 2014, 10:46:58 PM

Title: G0 not moving at max speed
Post by: Romanr9999 on July 20, 2014, 10:46:58 PM

Hello.
I noticed something strange today. Whenever I do a G0 command it moves slower than if I use the jog keys.
In the motor tuning setup I have 5000 mm/min and my G0 moves go at 2000 mm/min.
Why is that?

Title: G0 not moving at max speed
Post by: Alan XR8 on July 21, 2014, 05:34:57 AM

Hi Romanr9999,
Check feed rate overrides. They maybe set at 40%. Reset to 100%.


Alan