Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: chad.moore on July 03, 2014, 04:08:12 PM

Title: Need help with Pins and Port configuration
Post by: chad.moore on July 03, 2014, 04:08:12 PM
Hello all i am new to mach3 and am currently trying to set up a plasma machine with a slaveX/A axis.  In the (config/ports and pins/motor output screen) enable and disable motors works, but pins does not.  Doesn't matter which pin i assign or simply a 0 and when jogged the same incorrect motor will move.  Please help.  Thanks.  Chad Moore
Title: Re: Need help with Pins and Port configuration
Post by: Hood on July 09, 2014, 02:33:54 PM
Please attach your xml.
Hood
Title: Re: Need help with Pins and Port configuration
Post by: chad.moore on July 10, 2014, 09:36:30 AM
I got it figured out after reading and watching the tutorials.  After hearing the description of the MaxNC and what it's purpose was for, I thought maybe this could be causing my problem.  I investigated and indeed the check box had been checked.  This was my problem Thanks for trying to help.