Machsupport Forum

Third party software and hardware support forums. => CS-Lab => Topic started by: sdow on July 02, 2014, 11:08:34 AM

Title: mach3 over read and csmio-ip-a
Post by: sdow on July 02, 2014, 11:08:34 AM

Hi
i every time have light red on when i change speed in feed rate  .... if i click on reset i have 100% and not led green and no led red ... when i change  up or down speed ...i got a led red ?

thanks

Title: Re: mach3 over read and csmio-ip-a
Post by: Hood on July 02, 2014, 01:02:39 PM

If I understand what you are meaning then that is normal, if you want the LED to be Green then change it in your screenset so that it is a 2 state LED
Hood

Title: Re: mach3 over read and csmio-ip-a
Post by: sdow on July 02, 2014, 01:53:42 PM

i can never got the green led

Title: Re: mach3 over read and csmio-ip-a
Post by: Hood on July 03, 2014, 03:32:06 AM

What I am saying is that is normal. The Override LED is either OFF (no colour) or Red Flashing.
If you want Green then Red/Green flashing like the Reset LED then you need to change that in the screenset, easy to do with any of the screen designers.
Hood

Title: Re: mach3 over read and csmio-ip-a
Post by: sdow on July 03, 2014, 07:59:12 AM

what is when led not flashing and what is when led flash

Title: Re: mach3 over read and csmio-ip-a
Post by: Hood on July 03, 2014, 04:04:18 PM

When the feedrate override is 100% the LED is off, when it is anything else it is on.
Hood