Machsupport Forum
Third party software and hardware support forums. => CS-Lab => Topic started by: rufan on June 03, 2014, 03:18:07 PM
-
Is it possible align a VFD spindle with the CSMIO IP-S
I have an encoder installed on the spindle motor, and signals go to the CSMIO-ENC threading module.
In the CSMIO diagnostic window; I see the motor speed and angle. When spindle is turned of and manual turn the spindle I can see the angle changing.
So this seem all to work.
In CSMIO plugin window> Spindle > Enable Spindle Axis is checked, Align at Stop = 0 deg.
Or is this function only for Servo Drives?
Thanks in advance.