Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Keith on February 24, 2006, 04:13:51 PM

Title: Jogging in Mach3
Post by: Keith on February 24, 2006, 04:13:51 PM

I just started to use the 'jog' function in Mach3 and found it on the diagnosis window(only there ,right?).'Continuous' works but step is not working.Used this function before with this machine and Mach2 with no problem.Any suggestions?-Keith

Title: Re: Jogging in Mach3
Post by: Keith on February 24, 2006, 04:24:41 PM

'Persistant jog mode', unchecked?-K

Title: Re: Jogging in Mach3
Post by: Art on February 24, 2006, 04:56:28 PM

Hi:

 Do you have a proper incrment in the increment box?

Art

Title: Re: Jogging in Mach3
Post by: Keith on February 24, 2006, 05:07:55 PM

Yes Art. In unchecking 'persistant jog mode' it seems to work.

Title: Re: Jogging in Mach3
Post by: Keith on February 25, 2006, 11:40:23 AM

The unchecking of the 'persistant jog mode' (of course) was just a coincidence.It started working for some unknown reason then firing up Mach3 again for the first time created the problem again.'Continuous' works,'step' does not.?-Keith

Title: Re: Jogging in Mach3
Post by: Keith on February 25, 2006, 11:55:03 AM

Sorry,stupid mistake,not use to new screen yet