Machsupport Forum
Mach Discussion => FAQs => Topic started by: martinus on May 15, 2014, 05:33:09 AM
-
Hello,
I'm new at this and i'm testing the different softwares ;D
My question:
is it possible to offset the height of your table like this software does:
(http://www.engraving.majosoft.com/engraving/assets/images/hobby_cnc_engraving_software005.gif)
allready thanks for any answers
grtz
Martinus
-
Mach3 does not do transformation matrix on any axis.
(;-) TP