Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: poppabear on April 18, 2014, 08:44:04 AM

Title: Totally Pumped! I got published in Digital Machinist Mag again!!
Post by: poppabear on April 18, 2014, 08:44:04 AM

The article (Digital Machinist, Volume 9, Issue 1), is called;

“Reading (and drawing) Electrical Prints for Your Machine”, which was from a real world retrofit of a Bridgeport II CNC. It has 1.3KW DC Servo drives pushed by “CNC Drives” 160V; 35A drives (x3), an “Automation Direct” 3kw VFD spindle drive, an “ESS” with multiple “CNC4PC” breakouts and other components! The Prints for this build are downloadable from Digital Machinist project downloads page, and includes a BOM. The prints are 11” x 17” standard industrial size (PDF Format), so you would need a large format printer if you want to print out a hardcopy set.

Scott
Title: Re: Totally Pumped! I got published in Digital Machinist Mag again!!
Post by: Picengraver on April 18, 2014, 11:47:46 AM
Well done, Scott.  I saw it yesterday. Congratulations.
John Champlain
Title: Re: Totally Pumped! I got published in Digital Machinist Mag again!!
Post by: RICH on April 19, 2014, 05:00:31 AM
Good for you Scott. Just got the mag in the mail and will have a read.
RICH
Title: Re: Totally Pumped! I got published in Digital Machinist Mag again!!
Post by: poppabear on April 19, 2014, 08:15:19 AM
Thanks Guys!!

Let me know what you think after you read it!
there where some formatting mistakes that somehow got in, during the printing process, but they are minor.

Scott
Title: Re: Totally Pumped! I got published in Digital Machinist Mag again!!
Post by: Sam on May 07, 2014, 11:55:20 PM
That's awesome Scott! Congrats!