Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Naijin on April 07, 2014, 11:58:24 PM

Title: MACH 3 MANUAL MYSTERY
Post by: Naijin on April 07, 2014, 11:58:24 PM

Hi there, I just had a look at the Mach 3 manual on the Newfangled web site, and notice that there are only 106 double sided pages, I have downloaded and printed a manual about two years ago and I ended up with 153 pages single sided, which divided by two equates to about 77 and a 1/2  double sided pages, my question is has the manual been added to or have I lost some pages??

Regards

Nick   ???

Title: Re: MACH 3 MANUAL MYSTERY
Post by: Hood on April 08, 2014, 03:01:46 PM

There were/are several manuals for MachMill, maybe that is the difference, for example there is a Mach3 Install and Config manual and a Mach3Mill user Manual.
Hood

Title: Re: MACH 3 MANUAL MYSTERY
Post by: Naijin on April 09, 2014, 07:10:47 AM

Thanks for opening my eyes Hood, lucky I read the right manual, I will now down load the other one and read through it,

Regards
Nick