Machsupport Forum

Mach Discussion => Mach3 under Vista => Topic started by: mike542 on March 11, 2007, 09:52:53 PM

Title: Mach 2 in Vista?
Post by: mike542 on March 11, 2007, 09:52:53 PM

I am using Mach 2 on XP Pro to run a home built CNC machine, but I would like to switch to Vista Home Basic Is this possible to do. Any help would be appreciated.

Title: Re: Mach 2 in Vista?
Post by: Hood on March 12, 2007, 02:09:37 AM

why not also switch to Mach3, you will be so much happier ;)
Try it now before you go to Vista, just download and install Mach3 and see the difference. You can have Mach2 and 3 on the same computer, only thing is you can't run both at the same time.

Hood