Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: markn on March 13, 2014, 09:59:10 PM
-
Gentlemen,
I have had a licensed copy of Mach3 on my computer for a number of years. I now would like to move the software and license to the PC that I am using for my Bridgeport retrofit. How do I accomplish this?
Thanks
-
Just copy the file license.dat to the new machine.
Regards,
Ray L.
-
It's Mach1Lic.dat
-
Your Mach3 license is called Mach1Lic.dat and it is in your original Mach3 folder - just copy and paste / transfer it to your new Mach3 folder and away you go (no need to purchase a new license).
If you wish, you can download the latest version of Mach3 from here http://www.machsupport.com/software/downloads-updates/
(originally contributed by our good friend Tweakie)
Russ
-
Quick draw McGerry :D
Regards,
Russ
:)
-
Thanks for the replies. When I copy the mach folder SETUP.EXE will not transfer over.
-
Hi
Has anyone experienced the issue with copying the setup.exe folder.
On my PC the folder appears faded compared to the folders in the Mach3 directory. I have the thumb drive plugged in paste the copy to it and I can see it. But when I transfer to the new PC the setup.exe file is not on the thumb drive..........
-
You shouldn't need any setup.exe file.
-
This is a fresh install on the BPort PC .. right ?
Download the version you prefer, save it then run it on your new pc. (from earlier link/FTP site)
Then add your .lic, custom screens, macros, brains, plugins and anything else from the old pc.
I don't think you can just copy the M3 folder to the new pc.
I could be wrong (again) though,
Russ
-
Hi guys.
I successfully downloaded and installed mach to the new PC. Now when I open mach the PC freezes. Any advice?
Thanks
-
Whatare the specs of the PC what OS and what additional software do you have on it.
How far do you actualy get before things freeze?
Is this a new computer or an older one just new to this purpose?
Hood
-
Hi Hood
Newer used computer with no other programs. I don't have processor specs with me. OS is XP. Freezes when I open mach. Click on mill icon, starts to load and freezes up
Thanks
-
Ok
Specs on pc; 600MGz 224mb ram
-
Software Requirements
Mach3 Minimum Recommended Requirements:
*Use of Parallel Port for machine control only on 32-bit versions of windows.
32-bit Desktop – Parallel Port Requirements
32-bit version of Windows 2000, Windows XP, Windows Vista, or Windows 7
1Ghz CPU
512MB RAM
Non-integrated Video Card with 32MB RAM(Large G-code files, especially 3D files will require a video card with 512MB RAM or higher)
From the Mach3 website.
Looks like you have one of Fred's old computers .... or maybe Barney's ? :)
Russ
-
Yeah. I looked a little earlier and realized the same thing. I bought this unit 6 years ago and child rearing took over. Just started to revisit the project after the Anilam Crusader picked out