Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: ozzey on February 26, 2014, 02:56:56 AM
-
hi im haveing problems with wizzards not working thay did work now dont i tryed to cut circle it turned in to a slot and sum say no licence do i have to buy a licence ?? for them
-
Sum say? Who are you talking about?
Newfangled wizards require a license the others do not. All will require the Mach license.
Btw if you go to the Mach site here, http://www.machsupport.com/software/mill-wizard-beta/
you will notice a new "Mill Wizard" this runs independently from Mach. It does require a license too.
-
i have got my license for mack3 it the wizards in mack3 im haveing truble with
-
Which wizards are the problem with regarding them requiring a licence?
On the circle one, did the toolpath display show a circle?
Hood
-
i have license for mill wizard [ witch i can save or find it after i save it ]its the wizards in mack 3 and no it didnt display a tool parth
-
Ok but which particular wizards are saying you need a licence? Is it all of the standard Mach3 ones or just the NewFangled ones?
So the toolpath showed the circle but the machine cut an oval? Could it be backlash?
Hood
-
most of nfs wizards say no licence copy cat is one
-
NFS requires an additional licence, Copycat is also one of the NFS wizards and thus it to requires the NFS licence.
Hood
-
ok i can find that licence on web site give me a link please
-
ok found it