Machsupport Forum
Third party software and hardware support forums. => Galil => Topic started by: bubba on February 21, 2014, 12:55:16 PM
-
Hi Folks
I need some of the Plug in screw connectors for the ICM 2900. Mine was not completely populated.
Let me know if you can spare some.
Thanks,
Joe
-
Still looking
-
I also need some of these too. Does anyone know where this can be purchased?
-
I should be able to let you know next week.
Cory at Galil looked it up for me and sent me a PDF on the part.
I attached the PDF to this post
-
They are a pretty common connector. I purchased them from Digikey or Mouser Electronics. There is a top access part number and a bottom access part number. But I ordered just top or bottom (I can't remember which) and they will interchange but just not wire up as nicely. If I can find my receipt from waaaaaay waaaaay back when, I'll post up the part number.
Ahh... Here it is. http://www.digikey.com/product-detail/en/ELFF04230/APC1176-ND/1787967 (http://www.digikey.com/product-detail/en/ELFF04230/APC1176-ND/1787967) They only have the top access ones in stock.
Steve
-
Thanks Steve just ordered.