Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: browns machine on January 30, 2014, 08:33:02 PM

Title: Controlling 8 stepper motors
Post by: browns machine on January 30, 2014, 08:33:02 PM
Will Mach 3 control 8 stepper motors in a DRO setting for linear position only?
Title: Re: Controlling 8 stepper motors
Post by: Hood on January 31, 2014, 02:49:17 AM
6 axes and spindle is the max Mach3 can control.
Hoodd