Machsupport Forum
Mach Discussion => Mach Screens => Screen designer tips and tutorials => Topic started by: Quin on January 08, 2014, 09:29:55 PM
-
I have been using v1.84 with success but wanted to up grade to V3.043 to take advantage of amending the initialization string. With V1.84 my screen was fine at a 1024 x 768 resolution. After I installed V3.043, my screen set would only fill about 80% of the monitor at a resolution of 800 x 600. What am I over looking?
Quin
-
Did you enable High res screens and auto screen enlarge in General config.? You will have to close mach and reopen for changes to those 2 to take effect............. or at least reload the screen.
Brett