Machsupport Forum

Tangent Corner => Bargain Basement => Topic started by: Tig-140 on December 22, 2013, 08:44:05 PM

Title: Clean out of Bridgeport parts
Post by: Tig-140 on December 22, 2013, 08:44:05 PM
I bought Boss Bridgeport with stepper motors, that had a V-ram, I'm in the process of upgrading to Mach 4 (Brian might finish 4 before I finish the machine) . I also have an tracer Bridgeport that I tore the  tracer off to make it a manual machine. The massive T-ram on the tracer was a thorn in my side, and knuckles. When looking for a V-ram for the tracer, I came across a Interact Bridgeport with an R-head. This permitted me to move the V-ram to the manual machine, and put the R-head on the CNC. This leaves lots of parts that need new homes.

1.2HP 3 Phase Bridgeport cnc head, NMTB 30 taper spindle,it has air speed control and air brake. The limit switches, home switch, and the solenoid air valves are included.
2. Bridgeport base with knee and table, ball screws, and chrome.
3. T-ram
4. Boss stepper motors
5. Interact drivers
6. SEM servo motors
7. Control cabinet with operator station and 15" touch screen.
8. Mounting base to mount head to the T-ram.
9. Other parts from a Boss and Interact Bridgeport mill, let me know what you are looking for, I might have it.

I'm located in Pennsburg PA, 18073
I can load on truck or trailer.
Contact for pics, or more info.
tigger1134@comcast.net

   


Title: Re: Clean out of Bridgeport parts
Post by: Tig-140 on December 27, 2013, 08:05:40 PM
SEM motors SOLD
Title: Re: Clean out of Bridgeport parts
Post by: Tig-140 on April 21, 2014, 09:46:47 PM
Bridgeport base with knee and table, and T-ram SCRAPPED
I did remove the ball screws for the X and Y axis.
SEM motors SOLD
Title: Re: Clean out of Bridgeport parts
Post by: eugenemach3 on September 13, 2018, 08:26:42 PM
looking for LSI-11 card for Bridgeport Boss 5 and nay other control parts you might have