Machsupport Forum

General CNC Chat => Show"N"Tell ( Your Machines) => Topic started by: dre361224 on March 01, 2007, 08:07:03 PM

Title: Finally done my CNC mill after 2 years
Post by: dre361224 on March 01, 2007, 08:07:03 PM

Hey there,
I just finished building my CNC mill last week.  Theres still a little adjustment to do on the Y axis but nothing major.  Visit my website and tell me what you think.  I have a few pictures and videos on it. 
http://www.drescnc.tk

Thanks

Dre

Title: Re: Finally done my CNC mill after 2 years
Post by: Brian Barker on March 01, 2007, 10:56:03 PM

Looks like turbo CNC to me :) they do a good job so I am okay with that  8)

Title: Re: Finally done my CNC mill after 2 years
Post by: dre361224 on March 02, 2007, 12:35:40 AM

Hey there,
Ya it is TurboCNC.  The only thing I can get running on that computer is DOS so I dont have much choise.  I would use Mach if I'd have a Windows computer that I can use.

Dre

Title: Re: Finally done my CNC mill after 2 years
Post by: chad on March 02, 2007, 01:33:59 AM

So you want to use lazycam for free, submit a link with an add for "Britney exposed" to drum up a little cash, and submit pictures of you using a competing product on the mach support site...

Classy.

chad

Title: Re: Finally done my CNC mill after 2 years
Post by: zarzul on March 02, 2007, 09:26:12 AM

Nice job,  what size steppers are you using?    How about the driver card, who make that?

What is the first thing you're going to make?

Title: Re: Finally done my CNC mill after 2 years
Post by: dre361224 on March 02, 2007, 11:48:33 AM

Hey there,

I'm using the HobbyCNC motors and driver.  The motors are 3V 3A.  I've tried to cut a few things but not much yet.