Machsupport Forum

Mach Discussion => Feature Requests => Topic started by: Kryten on December 14, 2013, 04:16:06 AM

Title: BED ERROR CORRECTION
Post by: Kryten on December 14, 2013, 04:16:06 AM

Some large or home built machines need to be able to compensate for inaccuracies in the machine frame. Some motion control cards have this function - eg DeltaTau PMAC.
You already have screw mapping which is a similar function so I would assume it wouldn't be hard to implement this.
Our machines are about 12 metres long welded structures similar to a lathe. The PMAC takes care of the inaccuracies in the frame.