Machsupport Forum
Third party software and hardware support forums. => SmoothStepper USB => Topic started by: xiaonu on November 30, 2013, 12:21:31 PM
-
1, mach3 modbus RTU controlled frequency by inverter, but when the drive starts, SS mistakes.
or，2, mach3 through modbus into 0-10V analog input to the inverter, inverter start, SS also appeared wrong
FTDI drivers to the latest version, Plugin is 17fd
Error returned from USB function FT_Write.
Error FTDI USB Driver Error
Error = FT_IO_ERROR
Bytes requested:64
Byees written:0