Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: joewinslow on November 26, 2013, 11:27:40 AM
-
Hi Guys,
Just ran first project in Mach 3 with a Cut3d Roughing file.
File doesn't complete - it stops at line 500 - is this due to my only having the Mach3 intro download or another issue?
Thanks!
Joe
-
Hi Joe,
The demo version of Mach3 is limited to 500 lines of code so you can 'try before you buy'. http://www.machsupport.com/licensing/
Tweakie.
-
that's what I thought - :) thanks tweakie.