Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Mitch Mitchell on November 25, 2013, 01:30:21 PM

Title: HELP ON SPINDEL SETUP
Post by: Mitch Mitchell on November 25, 2013, 01:30:21 PM

HI CAN YOU PLEACE HELP ME WITH THIS SETTINGS ON MY NEW SPINDEL. I CANT GET IT TO WORK AT ALL.
1.   SPINDEL
2.   3KW
3.   FREQUENCY 100
4.   SPEED 2400RPM
5.   VOLTAGE OF MOTOR 220VAC
6.   FULING ELECTRIC
7.   DZB312B003.7L2DK     NO. 4012216DK13381071 SERIES INVERTER
8.   INPUT VOLTAGE TO INVERTER IS 220VAC
9.   WERE DO I CONECT THE 220V (R,S,T)  SPINDEL (U,V,W)
10.   SPINDEL (1EARTH,2,3,4)
11.   THERE IS ALL THE F1,F2,F3 SETTINGS
12.   I NEED MACH3 (TO SWITCH THE SPINDEL ON AND OFF)

Title: Re: HELP ON SPINDEL SETUP
Post by: magicniner on November 26, 2013, 06:24:10 AM

Here's a link to a Fu Ling Inverter Manual,

http://www.scribd.com/doc/84435382/Fuling-Inverter-User-Manual

with any luck some or all will be relevant.
I'm using a mix of Hitachi, Siemens, Omron and ABB drives in my workshop, they are more expensive than the Chinese equivalents but the manuals are written in english, which for me makes them worth the extra as my Chinglish isn't very good ;-)
Regards,
Nick