Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: schweißer on November 03, 2013, 06:54:00 AM

Title: Mach3 config and Sheetcam floating head and thc proma i need Help
Post by: schweißer on November 03, 2013, 06:54:00 AM

hello,
sorry I'm new and have a few questions about my settings
you find attached my mach3 configs. my cam system is sheetcam

1. why does not thc?
2. what sheetcam post processor i need for the floating head and thc?

i need about all informations they have.
I am looking for 4 weeks on the internet but can not find anything.

Please help me.

Best Regards,

Title: Re: Mach3 config and Sheetcam floating head and thc proma i need Help
Post by: Tweakie.CNC on November 04, 2013, 11:18:10 AM

Check this thread, it may help http://www.machsupport.com/forum/index.php/topic,24202.0.html

Tweakie.

Title: Re: Mach3 config and Sheetcam floating head and thc proma i need Help
Post by: schweißer on November 13, 2013, 06:44:40 AM

Hello,

this video is not bad.
but some information is missing.

1. Which cam he used?
2. Which post postprocessor example sheetcam? or that's actually important for THC?
2.1 I have the the problem at the start. shweet offset with THC ZRef is okay but if M03(Plasma flame not start) i must I have to press restart. it would be better if m03 is not on, it automatically repeats the offset.
3. On my thc proma light all light? i change the signals, but mach3 wright the problem "please clear the THC signal". What ist the problem?

Best Regards,