Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: RoyT on October 31, 2013, 10:02:42 AM
-
Hi
I have a cnc 3040 the Chinese one from eBay.
Is it a good idea to change the standard control box ?
Any recommendation as to what with ..taking into account I am just a home hobby user so don't want to send a fortune on a start of the art system.
I am in the UK it seems USA carriage is very expensive for this stuff.
thanks
Roy
-
If it works just use it. If it gives problems then consider using other hardware.
Arc Euro Trade sell Leadshine stepper drives whic are decent.
Hood