Machsupport Forum
Tangent Corner => Tangent Corner => Topic started by: andy_con on October 30, 2013, 01:29:14 PM
-
hi all,
im interested in a vacuum table setup, I have a compressor for my cnc as that drives the atc.
its a bambi 50L 8bar jobby
ive seen these -
http://www.clampusystems.com/Ventrui.htmlhttp://www.clampusystems.com/Ventrui.html
I have emailed the place but they haven't got back to me, are these what I think they are? they use a compressor to generate a vacuum for a table?
-
i use one of these they work ok http://www.veneersupplies.com/products/Vac-Pro-Venturi-Vacuum-Generator.html
-
Andy, remember you only have around 3 or 4 cfm