Machsupport Forum
Tangent Corner => Tangent Corner => Topic started by: Rkjohn on October 24, 2013, 02:00:06 AM
-
I am building an Enclosure for my CNC machine. It will be 48” x 36” x 30” high using ¼” acrylic plastic. There will be no doors and it will be sealed, the entire enclosure moves up to the ceiling when not in use. Attached to the back will be a 1550 CFM dust collector with a 4” hose.
I plan to cut ¼” slats in the front for intake air flow.
How many sq. inches will I need for good air flow so it doesn’t suck the sides in and takes out the max. amount of dust?
Thanks to all the engineers out there.
-
These may help.
http://www.engineeringtoolbox.com/ductwork-equations-d_883.html
http://www.woodworkingshop.com/product/wk10500/
Brett