Machsupport Forum
Mach Discussion => Brains Development => Topic started by: RandyC on October 11, 2013, 08:50:43 AM
-
I am trying to get a brain to work that will:
When input 1 is low then button press "cycle Start"
Then,
When input 1 is high, then button press "Cycle Stop"
I know this is probably very simple, but I have been trying for two days to get it working with no luck.
Thanks in advance!
-
Button presses are easy to program in macros. It's very simple to do it in a macro.
Zafar