Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: jamied on September 27, 2013, 03:40:06 AM
-
if anyone can cast an eye over the attached drawings and tell me what im missing , I have linked pin 6-20, I have no pin 7 so have linked pin 21 to pin 20 , linked pin 8 to 22 for forward run , and am feeding pins 3 and 4 with my 0 to 10v , have tried the alarm reset linked and un-linked but still get no drive , im obviously wrong somewhere but any help would be appreciated ,