Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: ostie01 on September 24, 2013, 03:21:07 AM

Title: 640 X 480 mach3 screen
Post by: ostie01 on September 24, 2013, 03:21:07 AM

Hi, I've built a small CNC saw running with Mach3.

Would like to remove the 17in screen and replace it with a small, I think it's a 4 X 6 screen or something like that.

Since I only need 2 DRO's and a couple of functions, could it be possible to create a screen for that.

I don't need toolpath display.

Thanks for any help.

Jeff

Title: Re: 640 X 480 mach3 screen
Post by: Hood on September 24, 2013, 04:50:20 PM

Its fairly easy to do with any of the screen designers available. I like screen4 but others like Mach Screen.
Hood