Machsupport Forum
General CNC Chat => Show"N"Tell ( Your Machines) => Topic started by: Meccanica Cortini on September 22, 2013, 06:12:33 PM
-
Hi,
I've got this nice little mill that I converted to modern controller/driver/stepper setup.
After wiring it all up, everything moves the way it should.
Listen to the stepper motors as the program mills a circle tho, sounds like a car shifting 1,2,3 when acc/decc at the quadrants of the circle.
I can't get friendly with it... the transmission is toothed-belt. Can anybody hear something I should double check on ?
http://youtu.be/7EOwui47Moc (http://youtu.be/7EOwui47Moc)
Thanks for any suggestions.
I'll post some more pictures of the setup when I get out of the shop :)
Cheers
Marco
-
Hi Marco; sounds like your stepper motor accel values are very conservative (slow). Try increasing the accel values and see if that helps.:)
-
Here is what happened so far...
Machine: Meccanica Cortini C3 with Cortini 2437 controller and Zebotronics driver and motors made back in 86.
I bought the machine 3 years ago and used it in it original setup.
Was a strong and consistant workhorse.
(http://i1276.photobucket.com/albums/y477/Marco_Weibel/image_zps7e6bd2c3.jpg) (http://s1276.photobucket.com/user/Marco_Weibel/media/image_zps7e6bd2c3.jpg.html)
The memory board finally gave up rendering the machine useless for production.
I decided to go with Mach and Gecko with 950oz NEMA34 stepper motors.
(http://i1276.photobucket.com/albums/y477/Marco_Weibel/image_zps0c3a1dc6.jpg) (http://s1276.photobucket.com/user/Marco_Weibel/media/image_zps0c3a1dc6.jpg.html)
(http://i1276.photobucket.com/albums/y477/Marco_Weibel/image_zpsb12e94c6.jpg) (http://s1276.photobucket.com/user/Marco_Weibel/media/image_zpsb12e94c6.jpg.html)
(http://i1276.photobucket.com/albums/y477/Marco_Weibel/image_zpsaed604a8.jpg) (http://s1276.photobucket.com/user/Marco_Weibel/media/image_zpsaed604a8.jpg.html)
(http://i1276.photobucket.com/albums/y477/Marco_Weibel/image_zpsc1c41b7c.jpg) (http://s1276.photobucket.com/user/Marco_Weibel/media/image_zpsc1c41b7c.jpg.html)
(http://i1276.photobucket.com/albums/y477/Marco_Weibel/image_zps45d9284a.jpg) (http://s1276.photobucket.com/user/Marco_Weibel/media/image_zps45d9284a.jpg.html)
(http://i1276.photobucket.com/albums/y477/Marco_Weibel/image_zps4d60dfd9.jpg) (http://s1276.photobucket.com/user/Marco_Weibel/media/image_zps4d60dfd9.jpg.html)
(http://i1276.photobucket.com/albums/y477/Marco_Weibel/image_zpsffe5a174.jpg) (http://s1276.photobucket.com/user/Marco_Weibel/media/image_zpsffe5a174.jpg.html)
(http://i1276.photobucket.com/albums/y477/Marco_Weibel/image_zps14f24d68.jpg) (http://s1276.photobucket.com/user/Marco_Weibel/media/image_zps14f24d68.jpg.html)
(http://i1276.photobucket.com/albums/y477/Marco_Weibel/image_zps2918dfb6.jpg) (http://s1276.photobucket.com/user/Marco_Weibel/media/image_zps2918dfb6.jpg.html)