Machsupport Forum
Mach Discussion => VB and the development of wizards => Topic started by: simmsey on September 10, 2013, 05:10:35 AM
-
I would like to change the toolpath view programmatically in Mach3. i.e. zoom in or out, pan and tilt etc.
Is there a way to do this from VB for instance?
Background: I have a cnc setup without touch screen and am trying to eliminate need to use mouse input but need some ability to manipulate the toolpath view from button inputs.
-
I would suggest a small touch pad added to your panel. They are simple and CHEAP.
I do not know of any way to manipulate the toolpath with CB
(;-) TP